After the device is installed someone has to come back and repair the wall. This will often lead to a hole larger than necessary and potentially cannot be covered by our device. When a box or mud ring is set too far back, they have to freehand the cut. Sheetrockers often use a plunge-cutting rotary tool that rides along the inside lip of the box as they cut the hole. In cases where the trim device uses stainless screws, it takes even more time and cost to purchase and install the longer screws.Ĥ. This adds time and materials to carry and use longer screws. A box with the mounting screw holes set more than 1/2" back from the finished surface will often require longer screws than what is provided with the trim device. Taking the time to set the box or mud ring level allows for a faster, smoother better looking finished job.ģ. Not all devices or trim plates installed on boxes have the ability to adjust for a crooked box. If wall repair is required after exposing the box, the contractor has to be informed, which is rarely a pleasant conversation.Ģ. Locating and exposing a buried box takes time and is not always successful the first time. If you do not notice the covered box until its time to trim, you may have to expose the box yourself. A box that is not set at the proper depth is far more likely to be covered by sheet rockers. Top Reasons For Setting Boxes Correctlyġ. Regardless of which box you select, a key factor when installing an electrical box is to set the box or select a mud ring that matches the planned thickness of the wall material AND set it level. This article will cover the most common boxes used at Security Solutions. In many cases, there are several correct options, each with advantages, disadvantages and costs to consider. Electrical boxes come in many shapes, sizes and materials.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |